Use the same -H type dies as the Hydro-Press!

Mega-Mite Press
	Quantity in Basket: None Catalog No.: CSP-2 Price: $1,949.00 Shipping Weight: 70.00 pounds Sorry, we are no longer taking orders for the Mega-Mite Press on our legacy website. Please visit our new website at Corbins.com for all future orders. Any question/concerns you can reach us at sales@corbins.com Thank you
	Select head/thread size: Standard 1-1/2 x 12 tpi Enter thread size/pitch below ($358+) Custom thread specs:   1 Optional floor stand (+$699.00)   Add Long Handle ($120) Optional Note: Select desired handle type (included w/press): Standard CSP-2SH (roller side bar) Long handle CSP-2LH
The CSP-2 Mega Mite is a heavy duty precision press that uses type -H Corbin swage dies, which also fit the Corbin Hydro-Press. The CSP-2 Press comes with these items included: Reloading Adapter Kit (7/8-14 bushing for head, ram extension and shell holder adapter for RCBS-type shell holders. FPH-1-H Floating Punch Holder for top (external) punches used in bullet swaging dies Roller Side-Bar Handle (CSP-2SH) CHP-PIN retractor pin, CSP-2KO knock-out bar set Precision alignment, heavy duty roller bearings, industrial hard-chromed ram, and triple strokes of 2.4 inches, 4.0 and 6.0 inches give the Mega Mite amazing versatility, power, and strength. It is entirely hand-built in small lots by die-makers at the Corbin die works, assembled and tested using alignment jigs. Military research labs, arms developers and handloaders as well as custom bullet makers place orders from around the world, with reservations sometimes reaching three months. Features and Specifications: Triple strokes of 2.4-inch (swaging), 4.0-inch (drawing/reloading) and 6-inch (large cal reloading) Press head is threaded 1-1/2 inch x 12 pitch, acccepts standard 50 BMG (RCBS, Hornady, etc.) reloading dies directly. Reloading adapter kit converts head and ram for standard reloading dies and button-type shell holders. Optional extra kits available for spares or to replace lost items. Reloading adapter kit includes ram extension with primer port for spent primer ejection, accepts Corbin 50 BMG shell holder or RCBS-type shell holder adapter. Press weighs 70 pounds, uses hardened chrome steel guides. Removable inch-thick steel head with accessory guides. Left or right side handle mounting. Side-bar roller handle and optional long handle. Reloads 50 BMG, swages from .14 to 1.0 inch bullets. Ram threaded for 1-inch x 12 pitch, uses type -H dies. Adapters available for nearly any die or punch. Mounts directly on your bench, or on optional free-standing support. Comes with FREE floating punch holder FPH-1-H. Ram travels in bearings, aligned by inch-thick guide plate. Press may be shipped via UPS. Press with stand must be sent by truck, as it exceeds the UPS weight/size limit. Shipping by truck is normally freight collect. The estimated shipping may be incorrect depending on specific routing and delivery location. We will be glad to contact you with an accurate quote from the truck line prior to shipment. The press cannot be sent by Priority Mail as it is too large and heavy to meet post office limits. But it can be sent by truck, by UPS, air freight or surface freight for out of country exports. If you select an inappropriate shipping method, such as a postal service, the program will accept your order but we will have to use a valid means of shipment instead.

Related Item(s)

Code	Name	Price	Availability
CHP-1	Corbin Hydro-Press	$12,540.00	Check at Corbins.com
CSP-S	Adjustable Floor Stand for CSP-1, CSP-2	$699.00	Check at Corbins.com
CSP-2LH	Long Handle for Mega-Mite Press	$120.00	Check at Corbins.com
CSP-2SH	Roller Handle for CSP-2	$120.00	Check at Corbins.com
CHP-EXT	Press rod extender kit	$155.00	Check at Corbins.com
CHP-S2H	Ram Adapter, 5/8-24 to 1-12	$59.00	Check at Corbins.com
CHP-B2	Adapter Bushing, 1.5x12 to 1.25x12	$159.00	Check at Corbins.com
RLA-B	Bushing, 1.5 x 12 to 7/8 x 14	$70.00	Check at Corbins.com
RLA-EX	Ram Extender, -H	$70.00	Check at Corbins.com
RLA-H	Reloading Adapter, Std. Shell Holders	$95.00	Check at Corbins.com
SH-50	50 BMG Shell Holder	$95.00	Check at Corbins.com
PT-50-H	50 BMG Priming Tool	$238.00	Check at Corbins.com
FPH-1-H	Floating Punch Holder, -H	$149.00	Check at Corbins.com
FPH-QC-H	Quick Change Punch Holder, -H type	$249.00	Check at Corbins.com
FPH-2-H	Positive Stop Punch Holder, -H type	$249.00	Check at Corbins.com
CHP-PIN	Retraction Pin, CSP-2 or CHP-1	$7.00	Check at Corbins.com
APA-2-H	Arbor Press Anvil Kit for CSP-2, CHP-1	$200.00	Check at Corbins.com
CHP-B	Adapter, 1.5 x 12 OD, custom ID.	$155.00	Check at Corbins.com
CHP-B1	Adapter Bushing, 1.5x12 to 1.0x14 ID	$70.00	Check at Corbins.com
CHP-T	Catcher Tray for CSP-2, CHP-1 press	$22.00	Check at Corbins.com
CSP-2KO	CSP-2 Knock-Out Bar Set	$50.00	Check at Corbins.com
CSP-2C	Mega Mite Handle Retainer Assembly	$35.00	Check at Corbins.com
CSP-2RAM	CSP-2 Mega Mite Ram	$298.00	Check at Corbins.com
CSP-2SPR	CSP-2 and CHP-1 Retraction Spring	$19.50	Check at Corbins.com