Lead Semi-Wadcutter Die, type -S
	Quantity in Basket: None Catalog No.: LSWC-1-S Price: $239.00 Shipping Weight: 1.00 pounds
	Enter actual diameter in inches: Nose shape (ext.): Flat Target Wadcutter Button Nose Wadcutter Conical SWC Keith Nose SWC Auto-Loader 1/2-E Round Nose 3/4-E SWC 1-E SWC 1-E Flat Tip SWC Custom nose shape ($70) describe/note Enter custom nose specs (if selected above):   Add Hollow Point to selected shape ($70) Select Base Shape:(Int.): Flat Base Dish Base Cup Base Hollow Base Rebated Boattail Base Base Guard(TM) Base Custom Base If checked, describe custom base: Optional Note:
	Quantity:
LSWC-1-S is a single die set with internal and external punch, having a straight bore and three bleed holes for weight adjustment. It can be used with soft lead up to Bhn 8-10 depending on the shape and caliber. The nose and the base are both formed by pressing against the end of a punch. The die set is used to make flat, cup, or hollow base lead bullets, gas checked or Base Guard base bullets, or half jacketed bullets if the jacket does not cover the position of the bleed holes in the die. The nose can be any SWC style (Keith, Button Wadcutter, Target Wadcutter, 3/4-E round nose, 1-E round nose, Conical, or any custom shape). The SWC styles always have a small shoulder, or step, between the end of the full-bore shank and the start of the nose. LSWC-1-S dies are used for handgun bullets, or for hollow based or cup base lead paper-patched rifle bullets. If you order for paper patch use, be sure to specify a bullet diameter that will work in your barrel after you add the paper! A .45-70 caliber, for example, might use a .458 diameter swaged bullet for a lead bullet that is to be dip or spray lubed, but it might be more likely to use a .448 diameter for use with .0025 inch thick paper patch in the same gun. You can add different nose and base punches to change the nose or base shapes in the same die. Shapes from left to right: TWC (target wadcutter), BWC (button nose wadcutter), Conical, Keith, AL (auto-loader), 3/4-E, and 1-E. Note: If you want custom bleed hole sizes, non-standard diameters, special punch shapes, or other features that are not "off the shelf" standards, please order the LSWC-1-SC custom die instead. It allows for various custom features.

Related Item(s)

Code	Name	Price	Availability
PUNCH-S	Standard punch, type -S	$70.00
CSL-2	Corbin Swage Lube, 2-oz	$10.00
CSL-16	Corbin Swage Lube, 16-oz	$55.00
LW-10	Lead Wire, 70,000 gr. spool	$66.00
LW-10S	Lead Wire, 10-lb., 0.1-in diam.	$66.00
LW-40	Lead Wire, 4 spools (net 40lb)	$237.60
LW-40S	Lead Wire, 40-lb, 0.1-inch	$237.60
PCS-1	Precision Core Cutter	$100.00
PCS-2	Magnum Core Cutter	$143.00
BGK-1-S	Base Guard Maker Kit, type -S	$287.00
GCM-1-S	Gas Check Maker, type -S	$549.00
LSWC-1-SC	Lead Semi-Wadcutter Custom -S Die	$323.00
PUNCH-SE	Punch Head Extension, -S	$12.50